Parquet flooring is favored by many homes and commercial spaces for its unique design and high-end aesthetics. However, due to its delicate structure and environmental sensitivity, special care is required during transportation and storage to avoid damage, deformation, or quality degradation due to improper handling. This article will explain in detail the key points of transportation and storage of parquet flooring to help you ensure the integrity and service life of the flooring.
1. Precautions for transportation of parquet flooring
Parquet flooring is different from ordinary wood flooring. It is an artistic product made of different woods spliced together, so it needs to be more careful during transportation. Here are some key transportation points:
1.1 Preparation before transportation
Before transporting parquet flooring, you should make adequate preparations to reduce the risks during transportation.
Check the packaging: High-quality parquet flooring is usually packaged in wooden boxes or sturdy cartons and lined with moisture-proof materials. Make sure the packaging is intact and there is no obvious damage or cracking.
Fix the wooden floor: Use foam, bubble film, or soft cloth to fill the gaps inside the package to prevent the wooden floor from colliding during transportation.
Marking direction: Mark "front facing up" and "fragile" on the outside of the package to remind the handling personnel to pay attention to the direction and prevent improper stacking.
Confirm quantity: Check the quantity on the shipping order to ensure that no products are missed or shipped by mistake.
1.2 Transportation method selection
Different transportation methods provide different degrees of protection for parquet flooring. Choosing the right transportation method can reduce the risk of damage.
Short-distance transportation: If it is short-distance transportation, such as city delivery, you can use a truck or van for transportation, but you need to use anti-skid mats to prevent the floor from sliding.
Long-distance transportation: For long-distance transportation, it is recommended to use sealed containers to avoid sun and rain, and use pallets for stacking to improve stability.
International transportation: For export parquet flooring, it is recommended to use wooden boxes for packaging and moisture-proof treatment to cope with temperature and humidity changes in sea or air transportation.
1.3 Protection measures during transportation
During transportation, the floor is easily affected by vibration, moisture, and temperature changes, so the following measures should be taken:
Shock protection: Use reinforcement measures such as foam pads and wooden frames to reduce damage caused by bumps.
Moisture-proof and waterproof: Avoid rain or high humidity during transportation. Waterproof film or plastic sheeting can be added to the outer layer of the packaging.
Avoid direct sunlight: Long-term exposure to high temperatures may cause wood to dry or deform, so direct sunlight should be avoided during transportation.
1.4 Precautions during loading and unloading
Handle with care: Parquet flooring is a high-end product. Avoid rough loading and unloading to avoid collision and surface damage.
Avoid dragging: Try to lift it when transporting it, instead of dragging it directly on the ground to prevent scratches or breaks.
Stacking method: When loading, it should be stacked horizontally, avoiding tilting and staggered stacking to prevent deformation.
2. Precautions for storage of parquet flooring
The storage environment of parquet flooring has a direct impact on its service life. Improper storage methods may cause moisture, deformation, cracking, and other problems of the floor. The following are the key points to pay attention to during storage.
2.1 Storage environment requirements
The storage environment of parquet flooring should be kept stable to avoid extreme conditions affecting its quality.
Suitable temperature: The storage temperature should be controlled between 15-25℃ to avoid excessively high or low temperatures that affect the stability of the wood.
Humidity control: It is recommended that the storage humidity be kept between 40%-60%. Too much humidity will cause the wood floor to swell, and too much dryness will easily crack.
Good ventilation: The storage area should be ventilated to avoid mildew caused by a humid environment.
2.2 Storage method
Store flat: Parquet floors should be placed horizontally, not tilted or vertically, to avoid deformation due to gravity.
Padding protection: The ground needs to be padded with wooden boards or moisture-proof mats to reduce the impact of moisture on the wood floor.
Avoid stacking too high: The stacking height should not exceed 1.5 meters, otherwise, the bottom board may be deformed due to pressure.
2.3 Moisture-proof and insect-proof measures
Moisture-proof protection: When storing in a humid environment, use a desiccant or place a wooden bracket to prevent the wood floor from directly contacting the ground.
Insect-proof treatment: Wood is easily eroded by pests. Insect repellent can be used during storage, or a sealed storage method can be selected.
2.4 Storage time management
Avoid long-term storage: Parquet flooring should be installed and used within 6 months after purchase. Long-term storage may cause material aging or environmental impact.
Regular inspection: If it needs to be stored for a long time, it should be checked every once in a while to ensure that it is not damp or deformed.
3. Common problems and solutions for transportation and storage
What to do if the floor is damp?
When it is slightly damp, it can be placed in a ventilated place to dry. Do not expose it directly to the sun or use heating equipment to dry it.
Floors that are severely damp and deformed may not be restored and need to be replaced.
What to do if it is damaged during transportation?
Insurance should be purchased before transportation so that compensation can be made in case of damage.
Minor scratches can be repaired with repair wax, and serious damage needs to be replaced.
What to do if the floor is found to be cracked during storage?
It may be caused by the storage environment being too dry, and the humidity should be appropriately increased.
Minor cracks can be repaired with wood wax oil, and serious cases need to be replaced.
The transportation and storage of parquet flooring are important links to ensure its quality and aesthetics. Reasonable packaging, safe transportation methods and a good storage environment can effectively extend the service life of the floor and avoid deformation, cracking or moisture caused by environmental factors. Strictly follow the above suggestions to ensure that the parquet floor is in the best condition before installation, so that it can show its unique artistic charm and excellent quality when used.
www.boruiwoodfloor.com
Borui floor
About Author
